What FRAMOS monochrome sensor modules output over MIPI CSI-2?

Question

Rapidflare · Accepted Answer

I found five FRAMOS monochrome image sensor modules that output natively over MIPI CSI-2. They support different numbers of MIPI lanes:

**FRAMOS monochrome modules with MIPI CSI-2 output**

| Product | MIPI CSI-2 lanes | Resolution (W×H) | Pixel pitch | Pixel bit depths |
|---|---|---|---|---|
| FSM-IMX297M-000-V1A | 1 lane | Not listed | 6.9 × 6.9 µm | 10-bit |
| FSM-IMX334M-000-V1A | 4 lanes | Not listed | 2 × 2 µm | 10-bit, 12-bit |
| FSM-IMX335M-000-V1A | 2 or 4 lanes | Not listed | 2 × 2 µm | 10-bit, 12-bit |
| FSM-IMX565M-000-V1A | 2 or 4 lanes | 4128 × 3008 | 2.74 × 2.74 µm | Not listed |
| FSM-IMX568M-01S-V1A | 2 or 4 lanes | 2472 × 2064 | 2.74 × 2.74 µm | Not listed |

All five are sensor boards, not complete cameras. They need a host system and, where applicable, a separate interface adapter.

**FRAMOS monochrome modules that don't use MIPI CSI-2:**
- FSM-IMX264M-000-V1A uses SubLVDS (4 lanes).
- FSM-IMX304M-000-V1A uses SubLVDS (4 or 8 lanes).
- FSM-IMX530M-000-V1A uses SLVS / SLVS-EC (1, 2, 4 or 8 lanes).

Datasheets for the 2/4-lane modules: [FSM-IMX335](https://framos.com/wp-content/uploads/2022/05/FSM-IMX335-Datasheet.pdf), [FSM-IMX565](https://framos.com/wp-content/uploads/2022/06/FSM-IMX565-Datasheet.pdf), [FSM-IMX568](https://framos.com/wp-content/uploads/2022/08/FSM-IMX568-Datasheet.pdf).

FRAMOS monochrome sensor modules with MIPI CSI-2 output

Sources

Product	MIPI CSI-2 lanes	Resolution (W×H)	Pixel pitch	Pixel bit depths
FSM-IMX297M-000-V1A	1 lane	Not listed	6.9 × 6.9 µm	10-bit
FSM-IMX334M-000-V1A	4 lanes	Not listed	2 × 2 µm	10-bit, 12-bit
FSM-IMX335M-000-V1A	2 or 4 lanes	Not listed	2 × 2 µm	10-bit, 12-bit
FSM-IMX565M-000-V1A	2 or 4 lanes	4128 × 3008	2.74 × 2.74 µm	Not listed
FSM-IMX568M-01S-V1A	2 or 4 lanes	2472 × 2064	2.74 × 2.74 µm	Not listed