Four FRAMOS sensor modules support 8-lane output. All four are listed under Image Sensor Modules.
FRAMOS modules with 8-lane output framos.com +3framos.com ↗“sensor_module.native_data_interface=SubLVDS (4 / 8 Lane)”framos.com ↗“sensor_module.chromaticity=Monochrome”framos.com ↗“sensor_module.native_data_interface=SLVS, SLVS-EC (1 / 2 / 4 / 8 Lane)”framos.com ↗“FSM-IMX530 Mono”
| Product ID | Sensor interface (lanes) | Color / Mono | Resolution |
|---|---|---|---|
| FSM-IMX304C-000-V1A | SubLVDS (4 / 8 Lane) | Color | 4112 × 3008 |
| FSM-IMX304M-000-V1A | SubLVDS (4 / 8 Lane) | Monochrome | 4112 × 3008 |
| FSM-IMX530C-000-V1A | SLVS, SLVS-EC (1 / 2 / 4 / 8 Lane) | Color | Not listed in the catalog |
| FSM-IMX530M-000-V1A | SLVS, SLVS-EC (1 / 2 / 4 / 8 Lane) | Monochrome | Not listed in the catalog |
- FSM-IMX304 (Color and Mono): 8 lanes come through the module's SubLVDS output, which can run as 4 or 8 lanes.
- FSM-IMX530 (Color and Mono): 8 lanes come through the SLVS / SLVS-EC output, which can run as 1, 2, 4 or 8 lanes.
- Adapter needed: each of these modules needs a host system and, where applicable, a separate interface adapter. framos.comframos.com ↗“Requires a host and, where applicable, a separate interface adapter.”
The FRAMOS modules that do list an interface use MIPI CSI-2 with up to 4 lanes. However, some FRAMOS modules don't have a sensor interface listed at all, so I can't confirm whether any of those support 8 lanes. The datasheets give full details on lane setup: FSM-IMX304 datasheet and FSM-IMX530 datasheet. framos.com +1framos.com ↗“cta.datasheet=”framos.com ↗“cta.datasheet=”