Two cards in our Vision Accelerator & Interface Cards range can power cameras over PoE. Both are PCIe cards with a Jetson module on board:
PoE-capable Vision Accelerator & Interface Cards neousys-te... +1neousys-tech.com ↗“io.poe=True”lips-hci.com ↗“2x 2.5GbE PoE+ ports for LIPSedge 3D cameras”
| Neousys PCIe-NX154PoE | LIPS LIPSedge F110 AGX-Xavier | |
|---|---|---|
| Mounting | PCIe card | PCIe card (endpoint mode) |
| PoE ports | 4 | 2 |
| PoE standard | 802.3at | 802.3af, 802.3at |
| Total PoE budget | 50 W | Not listed in the catalog |
| Ethernet ports / max speed | 5 / 2.5GbE | 3 / 2.5GbE |
| Jetson module | Jetson Orin NX 8GB / 16GB | Jetson AGX Xavier |
| Max AI performance | 100 TOPS (INT8 sparse) | 32 TOPS |
| Operating temperature | -25 °C to 60 °C | -20 °C to 50 °C |
| Lifecycle | Active | Not listed in the catalog |
What this means for your cell:
- PCIe-NX154PoE: This is the better fit if you have "several" cameras. It powers up to 4 cameras from a shared 50 W budget, so check that your cameras' combined draw stays under 50 W. Its temperature range only holds with airflow, and it also depends on power mode and the peripherals installed. neousys-te... +2neousys-tech.com ↗“io.poe_port_count=4”neousys-tech.com ↗“power.poe_total_budget_w=50 W”neousys-tech.com ↗“Requires airflow, Depends on power mode”
- LIPSedge F110 AGX-Xavier: It has 2 PoE+ ports, and LIPS describes them as being for LIPSedge 3D cameras. If you plan to use other cameras, check compatibility with LIPS first. lips-hci.comlips-hci.com ↗“2x 2.5GbE PoE+ ports for LIPSedge 3D cameras”
- Performance figures: The two TOPS numbers aren't directly comparable. The Orin NX figure is sparse INT8, and Xavier-generation figures are dense INT8. None of the other four cards in this range list PoE. They take cameras over other links: neousys-te...neousys-tech.com ↗“INT8 TOPS (sparse, Base)”
- Neousys PCIe-GL26: GMSL cameras, and it's EOL. neousys-te... +1neousys-tech.com ↗“io.gmsl_camera_inputs=6”neousys-tech.com ↗“identity.lifecycle_status=EOL”
- Neousys PCIe-NX156U3: 9 USB ports. neousys-te...neousys-tech.com ↗“io.usb_ports=9”
- D3 Embedded DesignCore FPD-Link III and GMSL2 interface cards: These connect board-to-board to Jetson AGX Orin dev kits, not to a PC's PCIe slot. d3embedded... +1d3embedded.com ↗“FPD-Link III interface/capture card for Jetson AGX Orin/AGX Orin Industrial dev kits”d3embedded.com ↗“GMSL2 interface/capture card for Jetson AGX Orin/AGX Orin Industrial dev kits”