Three fanless systems on AGX Orin (including the Industrial module) list MIL-STD-810H in their certifications:
| Product | Group | Module | Cooling | Temp range | IP rating | Other certs |
|---|---|---|---|---|---|---|
| Neousys NRU-230V-AWP | Edge AI Box PCs | Jetson AGX Orin / AGX Orin Industrial | Fanless | -40 to 70 °C (depends on power mode, PoE load, SKU/module, installed peripherals) | IP66 | CE, FCC Class A, EN 55032, EN 55035 |
| Connect Tech Sentry-X2 | Edge AI Box PCs | Jetson AGX Orin Industrial | Fanless | -40 to 70 °C | IP67 | DO-160H, MIL-STD-461G, MIL-HDBK-704F, MIL-HDBK-831 |
| Connect Tech Anvil-RX | Embedded AI Systems | Jetson AGX Orin / AGX Orin Industrial | Fanless | -40 to 65 °C | IP67 | MIL-STD-810H only (no others listed) |
All three carry MIL-STD-810H shock and vibration ratings. neousys-te... +2neousys-tech.com ↗“compliance.certifications=CE, FCC Class A, EN 55032, EN 55035, MIL-STD-810H”connecttech.com ↗“MIL-rugged edge AI system on Jetson AGX Orin Industrial; MIL-STD shock/vibration, IP67 D38999”connecttech.com ↗“compliance.certifications=MIL-STD-810H”
Notes relevant to an open-pit mine vehicle:
- Shock/vibration: Each lists MIL-STD-810H shock (Method 516.8, Procedure I on the NRU-230V-AWP) and vibration ratings (Method 514.8, Category 4 on the NRU-230V-AWP). neousys-te... +1neousys-tech.com ↗“MIL-STD-810H, Method 516.8, Procedure I”connecttech.com ↗“mechanical.vibration_rating=MIL-STD-810H”
- Dust/water: Sentry-X2 and Anvil-RX are IP67; the NRU-230V-AWP is IP66. - Vehicle interfaces: All three offer CAN bus (2 ports on Sentry-X2/Anvil-RX, 3 on the NRU-230V-AWP), 10GbE Ethernet, and Wi-Fi/BT; NRU-230V-AWP and Anvil-RX add 5G cellular and GNSS/GPS. neousys-te... +2neousys-tech.com ↗“io.can_port_count=3, io.max_ethernet_speed=10GbE, connectivity.cellular=5G, connectivity.gnss_gps=True”connecttech.com ↗“io.can_port_count=2, io.max_ethernet_speed=10GbE”connecttech.com ↗“io.can_port_count=2, io.max_ethernet_speed=10GbE, connectivity.cellular=5G, connectivity.gnss_gps=True” neousys-te... +2neousys-tech.com ↗“mechanical.ip_rating=IP66”connecttech.com ↗“mechanical.ip_rating=IP67”connecttech.com ↗“mechanical.ip_rating=IP67”
- Performance: 275 INT8 TOPS (sparse) on the NRU-230V-AWP and Anvil-RX; 248 TOPS (INT8, sparse) on the Sentry-X2. What I could not verify: these listings name MIL-STD-810H as a certification and give shock/vibration method references, but they do not state which specific MIL-STD-810H test methods/procedures were certified for each unit beyond what I quoted, nor whether certification covers the full standard. For a mining deployment you may also want to confirm dust ingress testing beyond the IP rating — I couldn't determine that from the catalog data. Vendor datasheets for each product are linked in the results above if you need the full test details. neousys-te... +2neousys-tech.com ↗“performance.max_ai_tops=275 TOPS”connecttech.com ↗“performance.max_ai_tops=248 TOPS”connecttech.com ↗“275 INT8 TOPS (sparse)”