The Connect Tech Rudi-NX FPD-Link III is the only Connect Tech complete system I found that supports Jetson Orin NX and is rated to 80°C.
Rudi-NX FPD-Link III: key specs connecttec... +2connecttech.com ↗“Connect Tech Rudi-NX fanless rugged edge AI system on Jetson Orin NX”connecttech.com ↗“thermal.max_operating_temp_c=80 °C, thermal.min_operating_temp_c=-20 °C”connecttech.com ↗“compatibility.supported_jetson_families=Jetson Orin NX, Jetson Orin Nano”
| Spec | Value |
|---|---|
| Type | Full System (Edge AI Box PC) |
| Supported modules | Jetson Orin NX, Jetson Orin Nano |
| Operating temperature | -20°C to 80°C |
| Cooling | Fanless |
| Power input | 9–36 V |
| Size | 105 × 135 × 50 mm |
| Weight | 646 g |
| Lifecycle status | Active |
Links: product page and datasheet. connecttec...connecttech.com ↗“cta.datasheet=”
Notes for an engine compartment:
- No headroom above 80°C. The rating tops out at exactly 80°C. If the compartment can get hotter than that, this system doesn't meet the requirement.
- No conditions are stated for the 80°C rating (such as airflow or power mode). Check the datasheet before you commit to it.
- Vibration, shock and IP rating: I didn't check these, and they matter for an engine install. The datasheet is the place to confirm them.
If you can build your own enclosure: several Connect Tech carrier boards support Orin NX and are rated higher. These are bare boards, not complete systems.
- Rated -40 to 85°C: Boson-22 and Boson for FRAMOS. connecttec... +1connecttech.com ↗“Connect Tech Boson-22 rugged carrier board for NVIDIA Jetson Orin NX / Orin Nano”connecttech.com ↗“Connect Tech Boson rugged carrier board for NVIDIA Jetson Orin NX / Orin Nano”
- Rated -25 to 85°C: Hadron GMSL and Hadron-DM. connecttec... +1connecttech.com ↗“Connect Tech Hadron GMSL carrier board for NVIDIA Jetson Orin NX or Orin Nano”connecttech.com ↗“Connect Tech Hadron-DM headless carrier board for NVIDIA Jetson Orin NX or Orin Nano”
- Lepton Carrier: rated -40 to 80°C. connecttec...connecttech.com ↗“-40 to 80C”