Four carrier boards are marked EOL (end-of-life):
EOL carrier boards forecr.io +3forecr.io ↗“Industrial carrier board for NVIDIA Jetson Nano, TX2 NX and Xavier NX.”avermedia.com ↗“AVerMedia carrier board for Jetson Xavier NX/TX2 NX/Nano”connecttech.com ↗“Connect Tech carrier board for NVIDIA Jetson TX2/TX2i”plink-ai.com ↗“PLink-AI Y-C2 carrier board with two base-mode Camera Link camera inputs”
| Product | Manufacturer | Jetson modules it supports |
|---|---|---|
| DSBOARD-NX2 | Forecr | Jetson Xavier NX, Jetson TX2 NX, Jetson Nano |
| EN715 | AVerMedia | Jetson Xavier NX, Jetson TX2 NX, Jetson Nano |
| Cogswell Carrier for Jetson TX2/TX2i (ASG007) | Connect Tech | Jetson TX2, Jetson TX2i |
| Y-C2 | PLink-AI | Jetson TX2 |
Connect Tech's own product description for the Cogswell board also says it is end-of-life. connecttec...connecttech.com ↗“End-of-life.”
Some boards have no status listed:
- 37 other carrier boards don't have a lifecycle status listed, so I can't tell you whether they're active or EOL. Please check those with the manufacturer before you design one in.
- I found no EOL boards among the carrier boards from our wider robotics and edge partners. But 3 of those boards also have no lifecycle status listed.
All four EOL boards are for older Jetson modules (Nano, TX2, TX2 NX, Xavier NX). If you tell me which module family you're designing around, I can list the carrier boards for that module and their lifecycle status.