The Connect Tech carrier you want is the Cogswell Carrier for Jetson TX2/TX2i (ASG007). It was the only Connect Tech TX2 carrier I could confirm with 4 PoE ports. It's designed for GigE Vision cameras, which suits a multi-camera setup. connecttec...connecttech.com ↗“Connect Tech carrier board for NVIDIA Jetson TX2/TX2i built for GigE Vision”
Cogswell (ASG007): key specs connecttec... +3connecttech.com ↗“5x Gigabit Ethernet with 4x PoE (802.3af) or 2x PoE+ (802.3at) PSE ports from a single +12V input”connecttech.com ↗“+12 DC Input Only; no external 48V required, carrier creates its own PoE power”connecttech.com ↗“Carrier rating; Jetson TX2 modules rated -25°C to +80°C at thermal plate”connecttech.com ↗“identity.lifecycle_status=EOL”
| Attribute | Value |
|---|---|
| Supported modules | Jetson TX2, Jetson TX2i |
| Ethernet | 5x Gigabit Ethernet |
| PoE | 4x PoE (IEEE 802.3af) or 2x PoE+ (IEEE 802.3at) |
| Power input | +12 V DC only. No external 48 V needed because the board makes its own PoE power |
| Operating temperature | -40 to +85 °C. This is the board's own rating; TX2 modules are rated -25 to +80 °C at the thermal plate |
| JetPack support | 3.0 to 4.6.5 |
| Lifecycle status | End-of-life (EOL) |
What this means for your install:
- Camera power: You get 4 PoE ports only if each camera stays within 802.3af limits. Cameras that need 802.3at (PoE+) cut you to 2 powered ports.
- Availability: The board is end-of-life. For a legacy setup, check that you can still get boards or spares before you commit.
- Other options: Many carrier boards in the catalog don't list a PoE port count. Another Connect Tech TX2 carrier with PoE could exist, but I could only confirm it for the Cogswell.
Connect Tech has more detail on the product page and in the datasheet. connecttec...connecttech.com ↗“cta.datasheet=”