The Oppila AstrOptix Orin Carrier Board is the only Oppila carrier board that has both an operating temperature rating down to -40 °C and CAN bus. oppila.in +1oppila.in ↗“io.can_bus=True”oppila.in ↗“thermal.min_operating_temp_c=-40 °C”
Oppila carrier boards: CAN bus and low-end operating temperature oppila.in +4oppila.in ↗“io.can_port_count=1”oppila.in ↗“io.can_port_count=1, io.max_ethernet_speed=1GbE”oppila.in ↗“thermal.min_operating_temp_c=-20 °C”oppila.in ↗“thermal.min_operating_temp_c=-40 °C”oppila.in ↗“thermal.min_operating_temp_c=-40 °C”
| Board | CAN bus | Min. operating temp | Max. operating temp | Meets both? |
|---|---|---|---|---|
| AstrOptix Orin Carrier Board | Yes (1 port) | -40 °C | 85 °C | Yes |
| AstrOptix Orin Super Carrier Board | Yes (1 port) | -20 °C | 85 °C | No (only rated to -20 °C) |
| Orin Nano Carrier Board | Not listed | -40 °C | 85 °C | CAN not confirmed |
| Orin Nano Lite Carrier Board | Not listed | -40 °C | 85 °C | CAN not confirmed |
About the AstrOptix Orin Carrier Board:
- It measures 90 x 60 mm and supports Jetson Orin Nano and Orin NX modules, including Super Mode. oppila.inoppila.in ↗“90 x 60 mm embedded vision carrier for Jetson Orin Nano and Orin NX modules with Super Mode support”
- It takes 12–19 V regulated power through a Molex Micro-Fit+ connector. oppila.inoppila.in ↗“Molex Micro-Fit+ connector, 12-19 V regulated”
The Orin Nano and Orin Nano Lite boards are also rated to -40 °C, but CAN bus isn't listed in their specs, so I can't confirm they have it.