Weight: The two boards are the same. Both weigh 1500 g (about 1.5 kg).
GMSL camera inputs: I couldn't find a GMSL camera input count for either board, so I can't tell you how they differ there. The only camera/video input details I found are for the WOLF-16T0, and they're SDI and CVBS, not GMSL.
| WOLF-16T0 (VPX3U-THOR-CX7-FGX2-SBC) | WOLF-16T5 (VPX3U-THOR-CX7-SBC) | |
|---|---|---|
| GMSL camera inputs | Not listed | Not listed |
| Weight | 1500 g | 1500 g |
WOLF-16T0 video inputs
- The 16T0 includes WOLF's FGX2 FPGA, which handles video formats the Thor chip doesn't support on its own. wolfadvanc...wolfadvancedtechnology.com ↗“the WOLF FGX2 FPGA for video formats that are not native to the Thor SoC”
- Its listed video inputs are SDI (through the FGX2) and CVBS. wolfadvanc...wolfadvancedtechnology.com ↗“Video Inputs\nSDI (via FGX2), CVBS”
- The block diagram shows 2x SDI In and 1x CVBS In on the rear P2B connector, plus another 1x CVBS In on P1. - WOLF's own advice is to pick the 16T0 over the 16T5 when you need SDI-class video input and output through the FGX2. wolfadvanc...wolfadvancedtechnology.com ↗“You need SDI-class video ingest/output through FGX2” wolfadvanc...wolfadvancedtechnology.com ↗“2x SDI In”
WOLF-16T5: I couldn't find any video input specs for this board.
The WOLF-16T0 product page and datasheet list it as preliminary, so the specs may change. To confirm GMSL support on either board, WOLF's datasheet for the WOLF-16T5 or WOLF sales would be the place to check.