select.parts
Selection

Jetson Orin Nano embedded systems accepting 48 V or higher power input

Asked as: “Running off a 48 V DC telecom supply. Which Jetson Orin Nano embedded systems accept 48 V or more on the power input?”

Answered by the Rapidflare agent

I found 7 Jetson Orin Nano embedded systems with a power input range that includes 48 V. They come from Realtimes, EverFocus, Connect Tech, PCB Arts and Seeed Studio.

Orin Nano embedded systems that accept 48 V DC realtimesa... +6realtimesai.com ↗“power.power_input=19-52 V”everfocus.com ↗“power.power_input=9-48 V”connecttech.com ↗“power.power_input=18-48 V”shop.pcb-arts.com ↗“power.power_input=12-48 V”seeedstudio.com ↗“power.power_input=19-54 V”seeedstudio.com ↗“XT30 Connector, DC 12-54V”wiki.seeedstudio.com ↗“XT30 Connector, DC 12-54V”

ProductManufacturerPower input rangeHighest input voltage
reComputer Robotics J3011Seeed Studio19–54 Vabove 48 V
reComputer Mini J3011Seeed Studio12–54 V (XT30 connector)above 48 V
reComputer Mini J3010Seeed Studio12–54 V (XT30 connector)above 48 V
RTSS-Z603-OrinNX/Orin NanoRealtimes19–52 Vabove 48 V
EAC-50N seriesEverFocus9–48 Vexactly 48 V
PolarisConnect Tech18–48 Vexactly 48 V
HeliumPCB Arts12–48 Vexactly 48 V

Notes:

  • Safety margin: EAC-50N, Polaris and Helium top out at exactly 48 V. If your telecom supply can run above its nominal 48 V, the four products rated to 52 V or 54 V give you more headroom. Measure your supply's real voltage range and compare it with the datasheet before you choose.
  • Polarity: I couldn't find whether any of these products accept a negative-ground (−48 V) telecom feed directly. Check this with the datasheet or the manufacturer.
  • Availability: The reComputer Mini J3011 is listed as EOL (end of life). seeedstudi...seeedstudio.com ↗“identity.lifecycle_status=EOL”
  • Ethernet on the reComputer Mini models: Ethernet, extra USB and CAN come only with the optional extension board. seeedstudi...seeedstudio.com ↗“Ethernet, extra USB and CAN come only with the optional extension board”
  • Module options: Polaris, Helium, EAC-50N and RTSS-Z603 take either an Orin Nano or an Orin NX module. The three Seeed Studio systems are listed for Orin Nano only. realtimesa... +1realtimesai.com ↗“compatibility.supported_jetson_families=Jetson Orin Nano, Jetson Orin NX”seeedstudio.com ↗“compatibility.supported_jetson_families=Jetson Orin Nano”

What I couldn't confirm: 21 more Orin Nano embedded systems have no power input range listed, so I can't tell whether they accept 48 V. They aren't in the table, but some of them might still work on a 48 V supply. Check their datasheets directly.

Sources

  1. RTSS-Z603-OrinNX/Orin Nano realtimesai.com
  2. EAC-50N series everfocus.com
  3. Polaris connecttech.com
  4. Helium shop.pcb-arts.com
  5. reComputer Robotics J3011 seeedstudio.com
  6. reComputer Mini J3011 seeedstudio.com
  7. reComputer Mini J3010 wiki.seeedstudio.com