Go with the reComputer Rugged J4012. It's the only Seeed Studio reComputer I found that has both an IP66 rating and a Jetson Orin NX module. seeedstudi...seeedstudio.com ↗“IP66 ruggedized edge box with Jetson Orin NX 16GB”
reComputer Rugged J4012: specs for an outdoor gate seeedstudi...seeedstudio.com ↗“mechanical.ip_rating=IP66”
| Spec | Value |
|---|---|
| Ingress protection | IP66 |
| Module | Jetson Orin NX 16GB |
| Cooling | Fanless |
| Operating temperature | -20 °C to 60 °C |
| Power input | 19–48 V |
| Connectors | M12/sealed connectors |
| Ethernet | 5 ports (1GbE), with PSE (powers devices over the Ethernet cable, PoE) |
| Cellular | 5G, through an M.2 Key B slot |
| Other I/O | CAN, RS-232/422/485, digital in/out, 6 USB |
| Storage | 128 GB |
| Lifecycle | Active |
Why it suits a gate:
- Weather: the sealed M12 connectors and fanless design suit outdoor mounting.
- Cameras: the PSE Ethernet ports can power PoE cameras directly.
- Gate control: the digital in/out and serial ports can drive gate actuators or sensors.
- Remote sites: 5G helps where there's no wired network.
What I couldn't confirm:
- I couldn't find an INT8 TOPS figure for this model. Its FP32 figure is 1.88 TFLOPS, based on the Orin NX 16GB module inside. seeedstudi...seeedstudio.com ↗“performance.max_fp32_tflops=1.88 TFLOPS”
- I couldn't find a Super-mode figure for it, so don't assume it supports Super mode.
- I couldn't find a mounting type for it.
Other models I checked:
- reComputer Rugged J3011: also IP66, but it uses a Jetson Orin Nano 8GB, not an Orin NX. It only fits if Orin Nano would do. seeedstudi...seeedstudio.com ↗“IP66 ruggedized edge box with Jetson Orin Nano 8GB”
- reComputer Industrial J4012 / J4011: these do use Orin NX, but they're only rated IP40. That's not enough for an outdoor installation without an extra enclosure. seeedstudi... +1seeedstudio.com ↗“-20 to 60 °C, 5G, IP40”seeedstudio.com ↗“-20 to 60 °C, 5G, IP40”